Model # |
Solar |
Load |
Voltage |
LVD |
Wire Size AWG/mm2 |
Weight oz/kg |
SunGuard |
4.5A |
|
12V |
no |
#16 / 2 |
3 / 0.09 |
INSTALLATION
SunGuard can be
mounted in any position. It is best to mount to a vertical surface and allow
space for air flow through the controller.
First connect the
Battery BLACK wire (negative) to the battery. Use either black wire since they
are connected together inside the controller.
Connect the RED
Battery positive wire to the battery.
Connect the Solar
array using the other BLACK wire and the YELLOW Solar positive wire. Be very
careful not to short circuit the solar array, or the controller will be
damaged.
SunGuard prevents
reverse current leakage at night, so a blocking diode is not required in the
system.
A negative earth
ground at the battery is recommended for most effective lightning protection.
SunGuard can be
mounted outdoors. Do not expose to ambient temperatures above 60°C. Make sure that water
will drain from inside the case.
|